The swimming pool water pump is specially developed according o the operational features of the swimming pools. It is designed to clean and remove dirt to keep the water in good quality and to eliminate the inconvenience of changing the water often. The pump is equipped with a special filtering system, which is fully mounted on a hand truck, where the process from sucking water to be standard water quality by filtering until it is finished.
The working principle of the swimming pool water pumps and the complete device is as follows:
- Both water and filter are sucked into the suction-disk.
- Then go into the pump to be thoroughly filtered to get rid of large grained dirt such as leaves
- Then go into the filter tank through the transport flexible tube o be fine filtered.
- The clean water via filtering goes back to the pool, thus the filtering is finished.
This set of equipment has an advantage in that it negates the necessity to change the pool water, only periodically use it to clean and filter and the operation becomes facilitated with the hand truck that is used. It is powerfully competitive in the world market due to its convenient movement and superior performance. It can also be used for the cold-hot circulation system of sauna.
- Pump Body: ABS
- Impeller: ABS
- Motor: Closed, externally ventilated
- Insulation Class: IP44 or IP54
- Duty: Continuously rated
- Mechanically seal ø12 & ø19 Ceramic steatite/metalized carbon
- Shaft: Stainless Steel
- Thermal Protector.
- Rated Voltage: As requested
- Rated Frequency: 50Hz or 60 Hz.
- Three Phase or Single Phase provided
|
